Does the floor washing machine need maintenance? Many people think that it is not necessary. They think that it is just like a broom and mop for sweeping the floor. If it breaks, you can just replace it. Of course, it’s understandable to think so, because this is a tool and equipment category after all. However, if the daily users know some maintenance knowledge, the life of the floor washing machine can be extended, and the work will not be delayed due to lack of maintenance. To be honest, floor washing machines cost several thousand yuan, but there are also ones worth tens of thousands, or even hundreds of thousands, which are much more expensive than the ordinary cars we usually drive, so it is good to know some common sense about maintenance.

The floor washing machine needs to be maintained after being used for a period of time. If problems arise during the use of the machine, it needs to be eliminated one by one so that it can be maintained with ease. Today, the editor will talk about the seven major points of floor washing machine maintenance. Friends, please take notes!

1. There are many reasons for motor overheating. Before using it, we must have a detailed understanding of the floor washing machine and eliminate problems in time. If we cannot solve the problem ourselves, we should contact the after-sales personnel as soon as possible to avoid unnecessary damage to the machine.

2. The water suction motor does not work. Check whether the sewage tank is full. If it is full, empty it in time. Check whether the motor power cord is connected properly, and deal with any abnormalities in time. Check whether the water-absorbing motor is damaged. If the motor is damaged, replace the motor in time. If the fuse is damaged, replace the fuse in time.

3. Battery maintenance. Check whether the battery is damaged and replace the parts promptly if damaged. Check whether the electrolytic solution is sufficient. If it is insufficient, add distilled water in time (except for maintenance-free batteries and lithium batteries). Check the battery electrodes for oxides or impurities. If there are oxides, wipe off the oxides. Check the battery capacity. If the working area is too large and the battery capacity is insufficient, replace the battery with a larger capacity or keep a spare battery.

4. The brush plate cannot rotate. Check whether the power cord is connected properly. Failure to do so may cause the brush disk to not rotate. Check the gear box for damage and replace it promptly if any damage is found. Check whether the motor has overheating protection. The overheating protection motor will stop operating and wait for the motor to cool down before restarting. Check whether the switch is turned on. If the switch position is incorrect, the brush plate will not work properly. When the water tank is insufficient, an appropriate amount of clean water should be injected to prevent the sweeper from overloading.

5. The quality of the floor washing machine motor can directly affect the service life and cleaning quality of the machine. According to customer feedback, some customers reported that the motor overheated after use. So how to solve this situation? When the machine is in use, parts will generally generate heat due to friction. If the heat is abnormal, we should check whether the bearings of the floor washing machine are short of oil or the clearance is too small. Also, if the machine has been used for a long time, the bearings are severely worn or even damaged. If the machine is overloaded, find the corresponding problem and then find a solution.

6. The motor of the floor washing machine should be maintained regularly after being used for a period of time. This will help to detect problems early and improve work efficiency. If there is a shortage of oil, add lubricating oil in time. If there is a problem with the bearing, it needs to be corrected or replaced. Also check the coil regularly for short circuit or open circuit. If there is any problem, rewind the coil.

7. Water cannot flow out of the floor scrubber. Check whether the clean water tank ball valve is damaged. If it is damaged, replace it. Check whether the water release switch is turned on. If the switch is not turned on, there will be no water. Check whether the amount of water in the clean water tank is appropriate. If there is water shortage, fill it in time. Check whether the water outlet pipe is smooth. If it is clogged, clean it in time.

Having said so much, it is necessary for the user to have a sufficient understanding of the floor washing machine and what parts it is composed of. Later, it is possible to determine what went wrong based on the accident. If the problem cannot be solved by oneself, the after-sales personnel of the floor washing machine manufacturer can fully express the reason when asking for the reason. The after-sales service personnel will also know what accessories or tools to bring before going for repairs, and will not delay the time and work of both parties due to wrong judgment!