Floor scrubbers are no longer unfamiliar to us. They are cleaning equipment machines that can wash, mop, and dry the floor at the same time. The concept of replacing human labor with machinery has gradually become popular. Floor scrubbers are suitable for places with vast hard floors such as stations, docks, airports, factory workshops, warehouses, schools, hospitals, restaurants, stores, warehouses, etc. Hard floors generally include: terrazzo, marble, granite, artificial stone, diamonds, PVC, steel sand, epoxy and other materials.

There are many brands of floor washing machines on the market, and the methods of use are more or less different. So let us take a look at the common methods of using YOUNISI floor washing machines.

1. Add water, open the clean water tank cover, add clean water to the clean water tank, and add an appropriate amount of detergent. The addition ratio can be determined according to the degree of turbidity of the clean environment, generally 1:5-10, and the water tank cover must be closed tightly. Note: It is strictly prohibited to pour washing powder, high-foaming detergent, and dishwashing liquid into the water tank. The foam produced will burn the machine (if it is a high-foaming detergent, be sure to add a foaming agent to the sewage tank)!

2. Equipment operation: turn on the key switch, lightly step on the brush plate pedal, put down the brush plate, put down the squeegee, press the brush plate and water suction switch, adjust the water supply according to the degree of oil pollution on the floor, press the handle control ring, and adjust the speed of the floor scrubber (if it is without a drive, it can be pushed forward without adjusting the speed, but it is not laborious. When the brush plate rotates, there will be a power to move forward; for a large area, it will be more labor-intensive to use a self-driven one, and it will be more tiring to use a semi-automatic one for a large area).

3. The floor washing machine can start the floor washing work; after the work is completed, first close the brush tray button, step on the brush tray pedal, lift the brush tray, and the machine continues to move forward. When the squeegee has sucked up all the water on the ground, close the squeegee button, lift the squeegee, and turn off the key switch. Push the machine to the sewage discharge place, discharge the sewage, clean the water tank, and finally place the floor washing machine in a dry and ventilated place, and the entire work is over. Note: It is strictly forbidden to leave the machine stationary for a long time when brushing the disk, as it will cause damage to the floor!

The operating methods are all similar. Users only need to pay more attention when using them and master the correct operating steps to ensure the service life of the floor washing machine. YOUNISI mainly produces floor washing machines, sweepers, etc. Its products are widely used in factories, hotels, hospitals, terminals and ports, petroleum and power, chemical industry, environmental protection industry, machinery manufacturing and other major fields.