Floor scrubbers are widely used in various places and various floor cleaning tasks. Since the introduction of floor scrubbers, cleaning workers' hands have been liberated. With the help of floor scrubber dryers, cleaning operations will be more efficient and faster. We all know that floor washing machines include hand-push floor washing machines and driving floor washing machines according to their operation methods. Today, the editor of YOUNISI will tell you how to maintain the hand push floor washing machine and what precautions should be taken when storing the machine.

1. Motor maintenance

(1) For motor maintenance, please contact the manufacturer of the hand push floor scrubber;

(2) The motor carbon brushes should be checked after every 250 hours of use. If the carbon brushes are severely worn, please contact the manufacturer to replace them (many motors now have no carbon brushes and are called brushless motors. If they are broken, they can be replaced directly).

2. Battery maintenance

(1) Please follow the battery charging chapter in the floor washing machine manufacturer's operating manual for maintenance;

(2) The top of the battery and the electrodes must be anti-corrosive. Soda water can be used to prevent corrosion, but this solution must not enter the battery;

(3) Use a brush dipped in soda water to wipe the battery and battery connecting cable.

(4) Check whether the battery cable is worn and whether the contacts are loose, and replace it if necessary.

3. Machine storage

(1) Store the hand push floor washing machine (fully automatic floor washing machine and semi-automatic floor washing machine) indoors in a dry place;

(2) Store the hand push floor washing machine in a flat area;

(3) Before storing the machine, the brush tray should be lifted off the ground;

(4) Before storing the machine, raise the squeegee assembly so that it is off the ground;

In addition, when we do this, don't forget to discharge the sewage from the sewage tank, as well as the clean water from the clean water tank (if it is winter, it is more needed, for fear of cold weather and freezing). After the sewage tank is discharged, we must also remember to clean the sewage tank. The last step is to clean the rubber strips and brush plate. After cleaning, place them in a ventilated and dry place.