[Introduction] Detailed explanation of the precautions for using electric mops: five key points!

With the continuous advancement of science and technology, the cleaning work of many enterprises has been transformed from manual cleaning to floor washing machine cleaning. Floor washing machines are also commonly referred to as sweepers and mops, and they are electric. They are convenient, fast, and flexible to operate. The cleaned floor will be clean and tidy without causing secondary pollution.

1. When the sewage tank is full: push the machine to the sewer outlet, unscrew the sewage cover and discharge; the other step is to clean the water tank, flush the sewage tank directly with water, remember not to flush the motor directly, as water will enter and burn the motor; clean the surface of the machine: wipe it with a clean rag.

2. Charging: First unplug the power supply plug of the floor washing machine, insert the charger plug, and insert the charger plug into the power socket. Charging time is generally about 8-10 hours. ?Note: It is strictly forbidden to leave the machine in place for a long time while brushing the disk, as it will cause damage to the floor! ?

3. Add water: Open the water tank cover, add clean water to the clean water tank, and add an appropriate amount of detergent. The addition ratio can be determined according to the degree of turbidity of the clean environment. The water tank cover must be closed tightly. ?Note: It is strictly prohibited to pour washing powder, high-foaming detergent, and dishwashing liquid into the water tank. The foam generated will damage or burn the water-absorbing motor! ?If you add high-foaming detergent, you can put an appropriate amount of foaming agent in the sewage tank and use it together.

4. Equipment operation: Turn on the key switch, lightly step on the brush tray pedal, put down the brush tray, put down the squeegee, press the water suction switch, adjust the water supply size according to the degree of oil pollution on the ground, hold down the brush tray handle, adjust the speed of the floor washer, and the floor washer can enter the floor washing work; after the cleaning is completed, the steps are the same as opening, just reverse all the steps.

5. Brushing back and brushing up: Generally, electric mops with a single brush disk automatically brush up and down. When brushing up, place the brush disk in the middle of the brush disk cover of the electric mop, then put down the brush disk cover, press the handle, and hold it once or twice to install it; in the same way for brushing back, lift the brush disk, and then press the handle, the brush disk will automatically fall down. For electric mops with double brushes, manually press the buckle position until it gets stuck. Generally speaking, the brush disk does not need to be loaded and unloaded frequently. ?

The above are some common precautions before and after the use of electric mops. In fact, when our YOUNISI electric mops are delivered to customers, we will have professional service personnel come to the customers for training. Users can just remember them when learning. In this way, not only can they quickly master the use skills, but they can also maintain and maintain the machine well, extending the service life of the electric mops.