There are 10 models of YOUNISI ride-on floor scrubbers. The following is a brief introduction to their characteristics and application places:

There are 5 models of YOUNISI industrial ride-on floor scrubbers, namely:

The small ride-on floor scrubbers U560 and U700 have floor scrubbing widths of 560MM and 700MM respectively. They are suitable for 5,000-10,000 square meters and can be used in various industrial and commercial places. They are compact and flexible.

Medium and large ride-on floor scrubbers U900H, U900A, U1000; U900H and U900A scrubbing width is 900MM, U900H is a domestic front-wheel drive, manual lifting, U900A It is an imported Italian Amer front-wheel drive with automatic lifting; the U1000 is 36V automatic lifting and equipped with six 6V255AH batteries with long battery life. The drive motor is also an imported Italian Amer front-wheel drive. These three models are suitable for places over 1W square meters, with wide cleaning width, large water tank and high cleaning efficiency.

There are 5 models of YOUNISI property type ride-on floor scrubbers, namely:

The small ride-on floor scrubber W700 is an upgraded version of the industrial model U700. The differences are: 1. It adopts 256*80 large wheels and the base is increased by 15MM to facilitate passing through the shock-absorbing belt of the garage; 2. The torque is 6NM, instead of the original 4NM, and the braking ability is stronger up and downhill.

The medium and large ride-on floor scrubber W900 is a 24V manual lift; the W9024 is a 24V automatic lift; the W9036 is a 36V automatic lift. The washing width is 900MM and is a rear-drive type. Mainly aimed at situations where real estate sites often climb hills, such as going back and forth between the basement and the ground, these three models are known as the "Kings of Climbing". They are full of power and high safety whether climbing or parking. In addition, these three models can also be used in factory workshops with heavy oil pollution to prevent slipping.

The other one is the U800R all-in-one washing and sweeping machine, which is a three-in-one washing, sweeping and drying machine. It has a roller brush design and a cleaning width of 800MM. It is especially suitable for non-slip floors with a small amount of garbage on the ground or uneven floors (such as anti-skid tiles, plastic runways, etc.). It is also particularly suitable for floors with a lot of screws, nuts and iron filings in machinery factories or stubborn oil and dust.