Although we went through various channels and comparisons, we finally bought our favorite cleaning equipment: a floor scrubber. Then there is a question, that is, how to let the users use the floor washing machine well, thereby reducing the failure rate of the floor washing machine. Next, let the editor of YOUNISI share some tips. The correct way to use the floor washing machine is as follows:

1. Before use, you must carefully read the manual of the floor washing machine, push floor washing machine, driving floor washing machine, and fully automatic floor washing machine. Especially users who are exposed to the floor washing machine for the first time must fully understand the working principle of the floor washing machine and the function of each button before operating the machine.

2. When users operate the floor washing machine, please carefully check the integrity of the machine.

3. If there are some large particles, metal wires, lathe waste, small stones, etc. on the cleaned floor, as well as other garbage that will affect the work of the squeegee, it needs to be cleaned. The squeegee must form a closed space with the ground so that the sewage can be recycled. Otherwise, it will not be able to work properly if it is not closed, and it will also cause damage to the floor washer. For the floor where the floor washer is used for the first time, always use a clean rag to clean the water-absorbent colloid to prevent the water-absorbent strip from being able to absorb it cleanly and leaving a trail of water stains.

4. Prepare for cleaning: First check whether the machine has power. Please do not use the machine when the power is low. Excessive discharge will shorten the service life of the battery a lot. Secondly, check the brush plate, rubber strips, etc.! Choose an appropriate cleaning agent based on the dirt on the floor: greasy floors require a degreasing agent; general dirt floors require a neutral detergent and at the same time inject an appropriate amount of defoaming agent into the sewage tank.

5. Before starting the brush motor, be sure to put the brush tray down, otherwise the brush tray will be automatically removed.

6. Tips for using the floor washer: For particularly dirty floors, you can choose to wash them repeatedly without absorbing water first, and then absorb water separately; for uneven floors, sometimes even after cleaning, if there is still water, you can raise the brush plate, start the water absorption switch, push the floor washer, and absorb water repeatedly and many times in the water accumulation area.

7. Another important point is to clean, clean and maintain the fully automatic floor washing machine. Specific methods: Drain the clean water and sewage in the equipment, because clean water with detergent stored for a long time will smell and deteriorate due to temperature and other factors, affecting the cleaning effect. After the sewage is discharged, the sludge, debris, and garbage in the sewage tank must be cleaned in time. After cleaning, if you want to charge it, charge it in time; if not, just put it in a ventilated place somewhere.

Floor washing machines are currently widely used cleaning equipment in factories, enterprises, cleaning companies, shopping malls, supermarkets and other places. Floor washing machines are mainly divided into hand-push floor washing machines and driving floor washing machines. Many people are still unfamiliar with this new type of cleaning equipment. If you master the seven major elements listed above, you can have a good grasp of it.