What is the reason for the sudden decrease in cleaning efficiency of the floor washing machine?

With the continuous development and changes of market demand, floor washing machines have been widely used in all walks of life, such as shopping malls, hotels, factories, schools, etc. And it has become one of the most popular cleaning equipment in the cleaning industry. The use of floor washing machines has brought us convenience and not only improved our living and travel environment, but many machines have reduced cleaning efficiency after use. Do you know the reasons?

1. The brush plate of the floor washing machine is seriously worn.

After a period of use of the floor washing machine, the brush disk will wear to varying degrees. If the brush disk wears to a certain extent, it will affect the cleaning speed and cleaning effect of the floor washing machine. Therefore, it is necessary to check the wear status of the brush plate from time to time and replace it to avoid unnecessary impact on the cleaning work.

2. The squeegee of the floor scrubber is damaged, and it is said that there may be residue attached to it.

The squeegee is also one of the important accessories of the floor scrubber. If the cleaning efficiency decreases, be sure to check whether there is any problem with the squeegee. First of all, check whether there is any residue on the squeegee. If there is any residue, it must be cleaned in time. It must be inspected and disposed of after each use to avoid delay in use. Also check to see if the angle between the squeegee and the ground is parallel, otherwise it will affect the water absorption of the squeegee. At the same time, this problem will also occur if the squeegee strips are severely worn. Both situations will cause the airtightness to decrease, resulting in incomplete water absorption and uncleanness.

3. Look at the power of the machine

Generally speaking, the greater the power of the machine, the higher the cleaning efficiency. Therefore, you should pay attention to this issue when purchasing, so as not to cause problems in the later stage, which will be troublesome and cannot be changed.

4. Check whether the water absorption system of the machine is suitable

The capacity of the sewage tank affects the machine's ability to absorb sewage. When purchasing, pay attention to the machine's sewage tank capacity. If it is too small, it will affect the normal operation of the machine and extend the working time. It is also troublesome to constantly store and discharge water, so when purchasing, you should choose a suitable floor washing machine based on the actual situation.

Whether the floor washing machine is purchased in the early stage or maintained in the later stage, it will affect the use of the machine and the service life of the machine. Therefore, each machine must be purchased carefully and used and maintained well.

The cleaning efficiency of the floor washing machine has a certain relationship with the model of the machine. Generally speaking, the working efficiency of the driving floor washing machine is more than 3,000 square meters per hour, while the cleaning efficiency of the hand push floor washing machine is more than 1,500 square meters per hour. All machines will become "sick" after being used for a long time. If you don't know what to do, in fact, we can solve some problems ourselves. Based on the above-mentioned reasons for the low efficiency of the floor washing machine, we proactively find the reasons and solve them so as not to delay the subsequent work process.