We all know that compared to the cleaning efficiency of hand-push floor washing machines, driving floor washing machines have high cleaning efficiency. The small ones can clean about 4,000 square meters per hour, and the large ones are even higher. The hand-push floor washing machines can clean about 2,000 square meters per hour. It is favored by users and widely used in the market. Following the correct operating steps of the ride-on floor washing machine can extend the life of the whole machine and ensure the cleaning effect.

How to use a ride-on floor scrubber? How to operate a ride-on floor scrubber? How to use a ride-on floor scrubber? These are some of the doubts that everyone has in mind. Many friends have more or less questions before purchasing a floor washing machine. The editor here writes an operation guide for a driving floor washing machine, hoping it can help everyone in their understanding.

1. Fully charge the floor washing machine battery.

2. Add clean water to the clean water tank, or add a certain proportion of cleaning agent (depending on the ground conditions to decide whether to add it or not)

3. Install the brush tray and squeegee.

4. Adjust the water flow through the solenoid valve.

5. Turn on the main switch. Press the accelerator pedal lightly and the machine starts to work. If the water absorption effect is not good, please adjust the squeegee until good water absorption effect is achieved.

6. After the work is completed, lift the squeegee and brush plate, drive to the sewage discharge area, and drain the sewage through the sewage pipe.

7. Regularly clean the dirt in the filter screen, squeegee, sewage tank, and sewage suction pipe.

8. Observe the battery power indicator at any time. If the power is insufficient, please charge it in time. It takes about 6-8 hours to charge.

Things to note

Empty the water in the sewage tank in time (otherwise it will enter the motor and cause the motor to burn out).

High-foaming cleaning agents or granular cleaning agents (such as washing powder) are prohibited (otherwise, the solenoid valve may be clogged and foam may easily enter the motor).

The driving floor scrubber is also called a floor scrubber. The characteristics of the YOUNISI ride-on floor washer are that it can clean a larger area of ​​the floor at one time because of its high working efficiency. Usually, a ride-on floor washer can clean 10,000-20,000 square meters of floor each time. Secondly, the driving floor washing machine is labor-saving and does not require manual operations. It only requires simple operation of the steering wheel and operation buttons to solve the cleaning work.

The above are the operating steps of the Hefei ride-on floor scrubber. When operating, everyone must not only learn how to operate it, but more importantly, know how to maintain it to ensure the use of the machine and not delay the daily cleaning work.