There are various floor washing machines on the market. Some are suitable for large warehouses, some are suitable for shopping malls with dense crowds, and some are suitable for oily floors. Now more and more companies are beginning to realize the benefits of using floor washing machines. Floor washing machines can be seen everywhere in office buildings, subway stations, airports and other places. So how should the factory workshop choose a floor washing machine? YOUNISI recommends analyzing it from the following three perspectives.

1. Factory workshop area and floor washing machine selection

The area of ​​the factory is a very important factor in choosing a floor washing machine. If a factory with a small area is fooled by a merchant and buys a large and expensive floor washing machine, it will be like killing a chicken with a knife, and it will not be able to bring out the value of the floor washing machine. It is too wasteful.

For factories with an area of ​​less than 2,000 square meters, it is recommended to use a hand-push floor scrubber. A battery-type hand-push floor scrubber is better if it can be driven. It does not take much effort to push, as long as you have a good grasp of the direction. It is not recommended to purchase a dragline hand push floor scrubber and it is a non-automatic type. Although the price is cheap, it will become more troublesome the more you use it. You have to find sockets everywhere and it is heavy when filled with water. Do you think the cleaning efficiency can be high?

If the plant area is about 10,000 square meters, it is recommended to use a small driving floor scrubber. The working efficiency of the small driving type floor scrubber is much higher than that of the hand push type. If it is pushed by people over such a large area, it will be very uneconomical in terms of time and cost. Some people say that buying a driving floor scrubber is too expensive and is not as cost-effective as a push-type floor scrubber. Let’s do the math. I’ll take the YOUNISI U700 small ride-on floor scrubber as an example. The working efficiency of a U700 floor scrubber is better than the floor cleaning effect and efficiency of 15 people. If the working hours of cleaning workers are 1,500 yuan/person/month, and a factory of 10,000 square meters requires 6 cleaning workers, 1,500 yuan/person/month It saves personnel management and expenses and improves efficiency, so why not do it.

For factories with an area of ​​more than 10,000 square meters, it is recommended to purchase a large ride-on floor scrubber that has a long battery life, high efficiency, and a large sewage tank. Otherwise, it would take more than ten minutes to clean the sewage tank and charge it, which would be more troublesome. For such a large area, you can choose YOUNISI U900AH or U1000.

2. Selection of floor material and floor washing machine in factory workshop

Whether the floor washing machine can exert its value is also related to the material of the floor it cleans. Some old factories are primitive and have cement floors, and the floors are in disrepair and are uneven. Then you should ask the merchant whether his floor washing machine can support rougher floors. You must know that the service life of the floor washing machine and the wear and tear of the floor washing machine consumables are greatly affected by the material of the floor, so you need to choose carefully and consider it carefully.

Most factories use marble, terrazzo, epoxy resin, PVC and other floors. Most floor scrubbers on the market still support such floors.

3. Types of stains on the factory floor and selection of floor scrubbers

Another thing you need to consider when purchasing a floor washing machine is what kind of stains are on the floor of the cleaning place. Each floor washing machine is designed to be specifically suitable for floor stains, and you need to purchase it in a targeted manner to improve efficiency.

Some factories have serious oil pollution, so they cannot buy ordinary dust-cleaning floor washing machines, which will not clean the floor and waste money. Some factories have a lot of dust and sand, so they may need a sweeper instead of a floor washer.

In fact, having said so much, the main thing is to first introduce the floor conditions of your factory workshop, and then the floor washing machine service provider will recommend one or several suitable models according to the ground conditions. You can also directly ask the merchant if you can come to test the machine for free. Which one is better? You will know after you come and try it!