The emergence of floor washing machines/floor washing trucks has replaced traditional cleaning tools and appeared in our daily lives. Its appearance has brought great convenience to our lives and production, making the environment around us tidier and cleaner. Automatic floor scrubbers have high cleaning efficiency, wide range of uses, and convenient operation. They are often necessary multi-purpose floor scrubber products for some medium and large enterprises or public places. This provides a beneficial guarantee for the company's staffing, daily expenses, and improvement of corporate image. How to extend the service life of the floor washing machine and reduce the cost? Next, the editor will explain to you based on many years of experience:

The excellent performance of a floor washing machine is inseparable from the maintenance of the floor washing machine. Correct maintenance can extend the service life of the floor washing machine. In fact, it is the same as the maintenance we do for cars. Irregular maintenance, aging or wear of mechanical parts may cause parts damage, loss of working ability, etc. Such failures can be completely avoided through correct installation, use and maintenance of the floor washing machine.

1. Maintenance and replacement of floor washing machine accessories:

1. Empty and clean the sewage tank of the floor scrubber. During operation, the floor scrubber absorbs a water mixture containing sludge, which can easily accumulate in the water tank and emit an unpleasant odor. Therefore it is very necessary to clean the water tank with running water.

2. Empty the clean water tank, especially not when cleaning is performed every day, otherwise the stagnant water will become a source of bacteria. Cleaning the water-absorbing filter sometimes produces some sediment, which weakens the absorbing effect. Please wash with running water.

3. Check whether the squeegee is clean; if necessary, clean the rubber strip and suction port with flowing water.

4. Check the wear of the scrubber brush plate and squeegee once a week. If the ground is extremely abrasive, strong pressure on the ground will damage these accessories or cause them to wear faster. Under normal circumstances, the brush plate can be replaced after 50 hours of use. On the contrary, after 30 hours of use, the absorbent strip should be replaced or the strip should be turned up and down (if the four sides of the strip are still available).

5. Check the water absorption filter regularly. Sometimes, the filter will be blocked due to small water impurities, which will affect the outflow of water during the cleaning process.

6. Clean the water suction pipe connected to the squeegee; even local obstructions will weaken the water absorption effect of the floor scrubber.

7. Check whether you are using floor foam cleaner. If necessary, add defoaming agent to the recovery tank. Remember: If there is a lot of dirt on the floor, a lot of foam will be produced, and the cleaning solution should be diluted.

2. Battery maintenance

1. As long as the battery is in normal use, there is no need to add water (if it is a maintenance-free battery, no water is needed).

2. In addition to charging for more than 12 hours before first use, usually 2-3 hours is enough when the battery is relatively sufficient, and 6-7 hours if the battery is low.

3. If it is not going to be used for a long time, the battery should be stored after it is fully charged and recharged regularly (1 month).

4. The battery shows that the battery is dead. After a period of time, it is found that the battery has a small amount of voltage, which is called "recovery voltage". Do not use this "recovery voltage" to drive.

5. Keep the battery away from high-temperature heat sources. During high temperature seasons, direct exposure to the sun is strictly prohibited (especially when storing the car in summer). Pay attention to good ventilation when charging.

6. Charge frequently so that the battery is always fully charged. If possible, it should be charged as needed, but the total charging time should be grasped.

7. Under normal circumstances, the battery will not cause any problems after being used for about 2 years. On the contrary, the service life will be greatly shortened, and the battery will have to be replaced with a new one after half a year of use.

3. Machine storage

(1) Store indoors in a dry place.

(2) Store upright.

(3) Lift the brush tray off the ground.

(4) Lift the wiper assembly off the ground.

(5) If the storage place is extremely cold, the machine needs to be kept completely dry before storing it to avoid damage caused by low temperature.

(6) Drain the sewage tank and clean water tank.

The above are some common daily methods on how to extend the service life of the floor washing machine. They are for reference only. I hope it can be helpful to the majority of users and help everyone save some money and do more work.