The fully automatic floor scrubber has a very wide range of applications and can be used for any material and any area. It is suitable for cleaning relatively flat indoor floors. The advantage is that the floor that needs to be cleaned can be cleaned at one time without having to repeat it, which can improve work efficiency. The popularity of floor washing machines has led more and more companies to use floor washing machines for cleaning.

Generally, fully automatic floor washing machines have one brush disk, but manufacturers will equip several floor scrubbers and cleaning brushes for customers to use. When cleaning the floor, they can be combined with clean water and detergent to achieve better cleaning results. However, try to use a low-foaming detergent because too much foam will damage the water-absorbing motor of the floor scrubber. If the floor to be cleaned is very dirty, it is recommended to pre-wash it first. Pre-washing means raising the squeegee first, turning off the suction motor, and scrubbing the floor repeatedly.

1. It is strictly forbidden to keep the floor washing machine stationary for a long time while it is working! If the fully automatic floor washing machine does not move for a long time during operation, excessive contact will occur between the brush plate of the floor washing machine and the ground, resulting in a large amount of friction at the same place on the ground. The adverse consequences of this friction are wear and tear on the ground, which can easily have adverse consequences on the ground.

2. Do not use water to flush the air inlet of the floor washer! It is strictly forbidden to use corrosive solutions to clean the surface and interior of the machine! After using the fully automatic floor washing machine, these hand push floor washing machines and driving floor washing machines must be cleaned in time. During the cleaning process, first block the air inlet of the fan with a rag. Otherwise, water flow will invade the fan and easily cause damage to the fan.

3. It is strictly prohibited to charge the battery frequently. The service life of the battery is usually greatly affected by the number of charges. The more times the battery is charged, the shorter the life of the battery. Therefore, in order to use our battery, we are strictly prohibited from frequently charging our fully automatic floor washing machine. We should only charge it after the power is almost consumed each time.

4. It is strictly prohibited to reverse the positive and negative poles of the battery. The battery of the fully automatic floor washing machine has clear requirements for connecting the positive and negative poles. The reason why people connect the positive and negative poles reversely is usually caused by carelessness. As long as you pay a little attention during use, it can generally be avoided.

5. It is strictly prohibited to pour washing powder, high-foaming detergent, and dishwashing liquid into the water tank. When some people clean the floor, they see that the floor is very dirty, and they want to put some detergent, washing powder, etc. into the hand push floor washing machine or the driving floor washing machine for cleaning. In fact, this idea is correct, but you cannot put in washing powder or high-foaming detergent. The correct way is to put in low-foaming detergent. As for the amount control, you can control it according to the ground.

After pre-washing or scrubbing the floor, we lower the squeegee head and turn on the water suction motor. After the squeegee head is lowered to the ground, the water-absorbing strips on the squeegee head will fit tightly on the ground to achieve the effect of scraping away the sewage on the floor. When the squeegee head collects the ground, the suction motor uses its strong suction to suck the sewage into the sewage tank.

Fully automatic floor washing machines not only have strong driving force, high work efficiency and good cleaning effect, but also have many types of fully automatic floor washing machines. The high-efficiency cleaning method of fully automatic floor washing machines allows a wide range of cleaning work to be completed in a time-saving and labor-saving manner. It not only reduces the cleaning work of cleaning personnel, but also saves energy, reduces labor costs and improves the safety of operations.