Yesterday, the editor already talked about the maintenance of the battery of the hand push floor scrubber, and I believe everyone has a full understanding of it. Friends who have used a hand push floor scrubber know that in addition to the battery as the power source of the floor scrubber, the brush disk motor and the suction motor are also very important components. With the brush disk motor, the brush disk can rotate and the floor can be scrubbed; with the suction motor, the cleaned floor dirt can be recycled to the sewage tank. So having said that, we will have a more in-depth understanding of the brush motor and water suction motor.

The hand push floor scrubber is a machine with floor washing and drying functions. The front brush plate motor scrubs the floor, and the rear water absorption motor and water-absorbent strips absorb sewage. Hand push floor scrubbers are currently widely used in factories, workshops, hotels, cleaning companies, property communities, supermarkets, hotels, office buildings and other places.

So do you know how to maintain the brush disc motor and water suction motor of a walk-behind floor scrubber?

1. Maintenance of the brush plate of the hand push floor washing machine.

1. The brush trays of hand-push floor scrubbers are generally round brushes. Appropriate brush trays and mats are determined according to different floors. On the one hand, they can extend the life of the mats, and on the other hand, they can better protect the ground from damage.

2. The brush pad of the hand push floor washing machine needs to be replaced regularly after a period of use to avoid excessive wear and poor floor washing effect.

3. The brush disk of the hand-push floor washing machine should be selected as the standard brush disk of the floor washing machine to avoid the complicated models on the market.

4. For the brush disk motor of the hand push floor washing machine, good floor washing machine manufacturers will now set an overload protector. If the resistance is too high, the floor washing machine will automatically cut off power and stop, thereby protecting the brush disk motor. Therefore, when we choose a hand push floor scrubber, we cannot blindly pursue cheap prices, but also pay more attention to the details.

2. Maintenance of the water suction motor of the hand push floor scrubber.

1. The water suction motor of the hand push floor washing machine mainly sucks sewage into the sewage tank, so when washing the floor, it is necessary to process the large garbage on the ground before washing the floor.

2. Regularly check whether there is any debris blocking the suction port. If it is blocked, unplug the suction port and clean it.

3. Part of the water absorption function of the hand push floor scrubber is inseparable from the wiper strip. After using it for a period of time, you need to regularly check the consumption of the strip and regularly check whether there are impurities under the strip that affect the water absorption effect.

The above maintenance information of the hand push floor washing machine is based on the experience accumulated from many years of floor washing machine. Now I share it with you. I hope that you can maintain it accurately in daily work and extend the service life of the hand push floor washing machine.