With the gradual increase in labor costs and the marketing and promotion of cleaning equipment, mechanization has become more and more obvious in replacing labor. Floor washing machines have gradually become entry-level cleaning equipment and are widely used in people's daily lives. In many cases, we must use floor washing machines. Then the problem comes. As time goes by and the frequency of use increases, no matter how good the equipment is, it will inevitably encounter problems. At this time, the application department or user must know where the problem is with the floor washing machine and what is probably causing it. It can also "prescribe the right medicine" very well.

In the process of using the floor washing machine, you will encounter a common problem, that is, the floor washing machine suddenly stops producing water during cleaning. How to solve it? Let’s discuss it with YOUNISI editor:

1. The water flow in the clean water tank is not enough. If the floor washing machine does not drain water when it is working, first check the clean water tank. If it does not drain water, it may be that there is no water in the clean water tank. Just inject clean water.

2. The water flow adjustment switch is not turned on. If the clean water tank is full and the water is not drained, you should also check the water flow adjustment switch to see if the cleaning switch for water flow entry is turned on. If it is off, it will be OK to turn it on immediately.

3. Check the filter. If neither of the above two possibilities is the case, then this is the one. Basically all floor washing machines often have a water filter. Usually the reason why the floor washing machine does not drain water is basically because the water filter is blocked and there is dirt in the water. Therefore, just remove the water filter and clean it, and then put it back after cleaning.

For some problems that occur with the floor washing machine, users should pay more attention to them when using them. This will help the maintenance personnel quickly find the problem and then repair it when communicating with the maintenance personnel.