Floor scrubbers may only be operated by authorized and trained personnel.

When the floor washing machine is working, please pay attention to the safety of other people, especially children.

Never mix different types of cleaning agents, which may produce harmful gases. Do not place any liquid storage containers on the floor washing machine. The storage temperature of the floor washing machine must be -25℃–55℃. The operating conditions of the floor washing machine: room temperature 0℃ to 40℃. The ambient humidity of the floor washing machine should be between 30 and 95%. The floor washing machine cannot be used or stored outdoors. Never use this floor washing machine in an explosive environment. This floor scrubber is not suitable for cleaning dangerous stolen goods. The use of flammable liquids is prohibited.

It is prohibited to use this floor washing machine to transport items.

It is forbidden to use acidic solutions to avoid damage to personnel and the floor scrubber.

Avoid running the cleaning brush when the floor washer is not moving: this may damage the floor. If the floor washer catches fire, please use a dry powder fire extinguisher to extinguish the fire. Do not use water to extinguish the fire. Do not operate near shelves or scaffolding where there is a risk of falling objects. Choose an appropriate operating speed according to the traction force.

Note: In order to avoid unstable situations, it is forbidden to operate the floor washing machine at a slope exceeding the allowed slope. After the floor washing machine is parked, remove the key and apply the handbrake.

The floor scrubber must complete cleaning and drying the floor simultaneously. Any other operations by unauthorized personnel are strictly prohibited. Appropriate notices should be provided for slippery floors.

Whenever the floor washing machine has an operational failure, please first confirm whether it is caused by insufficient daily maintenance;

When you replace accessories, be sure to ask for COMAC original accessories from the authorized agent or authorized retailer. Please only use COMAC original cleaning brushes according to the guidance of "Cleaning Brush Selection and Use". If danger occurs, immediately pull down the emergency brake lever (located on the left side of the floor washing machine control lever). Before performing any cleaning and maintenance, cut off the power supply to the floor washing machine. Do not disassemble parts that require the use of tools for disassembly and assembly with bare hands.

Before using the floor scrubber, be sure to install all covers and covers in accordance with this manual. Do not use corrosive reagents or high-pressure water to flush the floor scrubber directly.

In order to prevent detergent from condensing on the filter of the clean water tank, it is absolutely prohibited to add detergent a few hours before using the floor washer.

After using the floor scrubber for 200 hours, you should go to the nearest COMAC service point to check the floor scrubber.

Due to the toxic substances (batteries, oil, etc.) in the floor washing machine, the floor washing machine should not be discarded casually. Consumable items must be disposed of in strict accordance with the current local laws. Floor washing machine