The floor washing machine provides convenience for our cleaning work, which can be said to save time and effort. However, while using it, we also need to pay attention to the maintenance of the floor washing machine and the fully automatic floor washing machine. The consumables and wearing parts of the floor washing machine/floor washing truck include batteries, water tanks, squeegees, water-absorbing strips, brush trays and various spare parts. Therefore, if you want to save consumption and wear, you need to know the maintenance and replacement of floor washing truck spare parts, and some common sense about the replacement and maintenance of floor washing truck wearing parts.

1. Empty and clean the sewage tank of the floor scrubber. During operation, the floor scrubber absorbs a water mixture containing sludge, which can easily accumulate in the water tank and emit an unpleasant odor. Therefore it is very necessary to clean the water tank with running water.

2. Empty the clean water tank, especially not when cleaning is performed every day, otherwise the stagnant water will become a source of bacteria. Cleaning the water-absorbing filter sometimes produces some sediment, which weakens the absorbing effect. Please wash with running water.

3. Check whether the squeegee is clean; if necessary, clean the rubber strip and suction port with flowing water.

4. Check the wear of the scrubber brush plate and squeegee once a week. If the ground is extremely abrasive, strong pressure on the ground will damage these accessories or cause them to wear faster. Under normal circumstances, the brush plate can be replaced after 50 hours of use. On the contrary, after 30 hours of use, the absorbent strip should be replaced or the strip should be turned up and down (if the four sides of the strip are still available).

5. Check the water absorption filter regularly. Sometimes, the filter will be blocked due to small water impurities, which will affect the outflow of water during the cleaning process.

6. Clean the water suction pipe connected to the squeegee; even local obstructions will weaken the water absorption effect of the floor scrubber.

7. Check whether you are using floor foam cleaner. If needed, add some low-foaming agent to the recovery tank. Remember: If there is a lot of dirt on the floor, a lot of foam will be produced, and the cleaning solution should be diluted. Or buy a defoaming agent or foaming agent and put it into the sewage tank to dilute the foam and protect the vacuum motor of the floor scrubber.

To sum up, when it comes to the maintenance of floor washing machine/floor washing truck consumables and wearing parts, whether it is a hand-push floor washing machine or a driving floor washing machine, meeting the above seven elements can save consumption and wear, ensure the service life of the floor washing machine, and allow the floor washing machine to serve us better and longer.