How to self-check the Shijiazhuang floor washing machine?
As a tool and equipment to assist manual cleaning, Shijiazhuang floor washing machine has been recognized by more and more companies. Our company is a manufacturer of cleaning equipment. As a salesperson who has been in this industry for many years, sometimes customers ask: How to self-check the Shijiazhuang floor washing machine?
Shijiazhuang hand push floor washing machine is a commonly used cleaning tool, and it is very important to know how to maintain and repair it. Although this equipment is simple and convenient to use, many people still don't know how to perform self-inspection on the hand push floor washing machine.
1. Shijiazhuang floor washing machine does not clean thoroughly
Please check the wear condition of the Shijiazhuang floor washing machine brush disk first. If the life span is over or the wear is serious, please replace it immediately. This is the same as replacing the car brake pads. Replace it with a new Shijiazhuang floor washer brush disk of the same specification. When performing cleaning tasks on particularly dirty floors, a special brush disk should be used. The Shijiazhuang floor washer brush disk is specially provided as needed.
2. Shijiazhuang floor washing machine has too much foam
Check whether a low-foaming detergent is used. If necessary, add some low-foaming agent to the sewage tank. If there is a lot of dirt on the ground, a lot of foam will be produced, and the cleaning solution should be diluted at this time. There are also some factories and companies that use high-foaming detergents, similar to dish soap, and need to add foaming agents to the sewage tank to protect the water-absorbing motor.
3. The amount of water on the brush plate of Shijiazhuang floor washing machine is often insufficient.
If the water output of the Shijiazhuang hand push floor washer is insufficient during use, it will have a great impact on the cleaning effect. In this case, check whether the water valve is open and see if the amount of water in the clean water tank is sufficient. If the filter is blocked by foreign objects, clean it in time. Finally, check whether the pipe that delivers water to the brush plate is blocked. Checking and handling the above problems can solve the problem of insufficient water output.
4. Is the squeegee of Shijiazhuang floor washing machine not good at absorbing water?
Check whether the squeegee strips of Shijiazhuang floor washer are clean and whether there is any solid residue left inside. If so, remove the squeegee of Shijiazhuang floor washer and clean them. Adjust the height according to the wear and tear of the rubber strip of the floor washing machine. During the cleaning process, the rear rubber strip of the floor washing machine should bend backward in its length direction.
The above mentioned are some simple inspection tasks, which are also very easy to solve. Problems that users may encounter when using it. Therefore, users also need to know some common sense. If there is a problem that cannot be solved, they can call the manufacturer or local service provider to come and solve it.