The current floor washing machines are mainly divided into two types, one is a driving floor washing machine and the other is a hand push floor washing machine. Ride-on floor scrubbers are mainly used for cleaning large places. The ride-on floor washer is easy and fast to use, but in order to protect the life of the ride-on floor washer, daily maintenance of the ride-on floor washer is essential.

Today, let’s talk about the daily maintenance and upkeep of the ride-on floor scrubber. We take the YOUNISI small ride-on floor scrubber as an example to illustrate the daily maintenance and upkeep of the ride-on floor scrubber.

1. Drain the sewage, flush the sewage tank and sewage sensor cover, check whether the sewage filter is clean, if not, please unscrew it counterclockwise and clean it.

2. Remove the needle holder, scouring pad or brush plate for cleaning, and check the wear of the brush plate, needle holder and scouring pad so that they can be replaced in time.

3. Remove the squeegee assembly for cleaning: first remove the squeegee from the machine, unplug the suction pipe, open the pressure strip of the squeegee assembly, remove the rear rubber strip, unscrew the four nuts on the squeegee assembly, remove the black plastic base plate on the squeegee assembly, and take off the front rubber strip.

4. Installation of the squeegee: first install the front rubber strip (the grooves on both sides of the rubber strip are the front rubber strips), then install the black plastic bottom plate of the squeegee assembly and tighten the four nuts, then install the rear rubber strip of the squeegee and secure the squeegee assembly bead (note that when installing the rubber strip, the holes on the rubber strip should match the protruding nails on the black bottom plate of the squeegee assembly), then put the squeegee back into the squeegee bracket and insert the suction pipe.

5. Clean the body and battery and wipe them with a dry cloth.

6. Check the power of the device. It needs to be charged when the power reaches the red light (note that the charger should be placed in a ventilated place when charging, and do not block the heat dissipation holes of the charger to prevent the charger from overheating or damage).

The ride-on floor scrubber is suitable for surface cleaning of hard floors such as ceramic tiles, mirror stones, PVC, epoxy, emery, and polished cement. The ride-on floor scrubber is mainly widely used in large-area regular cycle ground cleaning in factory production workshops, food processing, airports, sports venues, semi-open squares of five-star hotels, underground parking lots, building passages and other venues. It is very important to do routine maintenance work.