[Introduction information] Causes and solutions of noise in Suzhou floor washing machines

Anyone who has used a floor washing machine knows that sometimes when the floor washing machine is used, the sound becomes louder and louder, which is very uncomfortable to listen to. So what are the reasons for the sound of the floor washing machine getting louder and turning into noise? Where is the main source of noise from floor washing machines? Let’s analyze it together:

Generally speaking, the noise of the floor scrubber mainly comes from the following three parts: the suction motor part, the brush plate motor part, the squeegee part, and the sewage tank part.

1. Water suction motor: Check whether the position of the sewage tank is loud. This situation may be due to a problem with the vacuum motor of the floor washer. If water enters the fan, it will cause abnormal operation. Therefore, when using the floor washer, the sewage must be cleaned to prevent water from entering the fan. On the other hand, some good brands of floor scrubbers, such as YOUNISI, are designed to be more considerate and user-friendly. When the sewage tank is full, a prompt will appear to remind you to discharge sewage.

2. Brush disc motor: Check the brush disc and brush disc motor of the floor washer. If the brush disc is installed incorrectly or is not installed in place, the equipment may collide with the brush disc during use, resulting in a loud sound. Another phenomenon is that when the brush disc motor is damaged or aged, the floor washer will produce a lot of noise when working. At this time, it is necessary to replace the brush disc motor of the floor washer to solve the noise problem.

3. Squeegee: Check whether the position of the floor scrubber's squeegee is loud. If the sound of water absorption at this time is too loud, it may be that the water-absorbent strip has aged and softened or the angle of contact with the ground is wrong. It will also cause poor water absorption. At this time, we need to adjust the position of the water-absorbent strip in contact with the ground, or replace it with a new one.

4. Sewage tank: The sewage tank is blocked. If there are a lot of solids on the ground to be cleaned, or the sewage tank of the floor washer is not cleaned for a long time, the garbage will accumulate and block all the openings of the sewage tank. When the air is not circulating, the floor washer will produce a very loud sound. When encountering this situation, you must patiently clean the sewage tank of the floor washing machine, clear the pipes, and clean the debris in the sewage tank in a timely manner.

The above describes the factors and solutions to the noise of Suzhou floor washing machines. If your floor washing machine makes a lot of noise, you may wish to check according to the above four aspects. Only by finding out the problem can the problem be better solved. Here is a small reminder. When using the floor washing machine, all users should also perform more maintenance on the floor washing machine. This can extend the service life of the floor washing machine and reduce the failure rate!