Many factory workshops, property cleaning companies, shopping malls and supermarkets, vegetable markets, farmers' markets, etc. are using YOUNISI floor scrubbers. This is inseparable from the improvement of the national awareness of environmental protection and cleaning. Demand is increasing and more and more manufacturers are joining the industry. In the same way, the price of YOUNISI floor washing machine is gradually accepted by the public. Now that we have purchased it, the question we should consider is: How to ensure that the service life of the YOUNISI floor washing machine is longer? Such a practical question. After all, its price is not cheap. If it is scrapped after only one or two years of use, it is a waste of resources. The following editor will introduce to you how to ensure a longer service life of the YOUNISI ride-on floor scrubber and hand-push floor scrubber.
The ten tips for using the YOUNISI floor scrubber are as follows:
1. When the work is completed, remove the floor brush of the YOUNISI floor washer and clean it to avoid deformation of the bristles caused by long-term pressure on the machine.
2. Empty and clean the sewage tank. During the use of the YOUNISI floor scrubber, the machine absorbs a water mixture containing sludge, which can easily accumulate in the water tank and emit an unpleasant odor. Therefore, it is very necessary to clean the water tank of the floor washing machine with flowing water.
3. Empty the clean water tank, especially when the YOUNISI floor scrubber is not used frequently for cleaning work, otherwise the stagnant water will become a source of bacteria.
4. Check whether the squeegee is clean. If it needs to be cleaned, use flowing water to clean the squeegee strips and suction port of the YOUNISI scrubber.
5. Clean the water suction pipe connected to the squeegee. This will not only effectively extend the service life of the YOUNISI floor scrubber, but also prevent local uncleaned obstructions from affecting its water absorption effect.
6. Regularly check the wear of the brush disc and squeegee of the YOUNISI floor scrubber. If the ground is extremely abrasive, strong pressure on the ground will damage these accessories or accelerate their wear.
7. Regularly check the water-absorbing filter of the YOUNISI floor washing machine. Sometimes, the filter will be blocked by small water impurities, which will affect the outflow of water during the cleaning process. It is worth noting that running water can clean it better.
8. Clean the sewage pipe regularly with clean water to prevent residual detergent from corroding the inner wall of the sewage pipe of the YOUNISI floor scrubber and preventing bacteria from growing inside.
9. When the YOUNISI floor washer is not in use, wipe the power cord with a dry cloth after cleaning, and wipe the body and chassis (outside and bottom) with a dry cloth.
10. When the YOUNISI floor washer is not in use, fully charge the battery, wind the power cord and hang it on the machine. The machine should also be placed in a dry and ventilated place to avoid the humid environment affecting the motor and shortening its service life.
The excellent performance of a YOUNISI floor washing machine is inseparable from its maintenance. Correct maintenance can extend the service life of a YOUNISI floor washing machine. In fact, it is the same as how we maintain our cars. Irregular maintenance, aging or wear of mechanical parts may cause parts damage, loss of working ability, etc. Such failures can be avoided through correct installation, use and maintenance of the YOUNISI floor scrubber.
Through the above ten inspection and maintenance methods, you will be able to avoid malfunctions of the YOUNISI floor washing machine during use. Only reasonable maintenance can ensure a longer life of the YOUNISI floor scrubber.