With the development of the times and the continuous increase of labor costs, more and more cleaning equipment such as floor scrubbers and fully automatic floor scrubbers are being widely used in the cleaning of public places, such as hotels, hospitals, factories, etc. Compared with the traditional "broom + mop" manual cleaning method, a large number of cleaning equipment such as floor scrubbers have great advantages:

On the one hand, a hand-push floor washer can clean an area of ​​2-3,000 square meters in one hour, and the cleaning efficiency is 10 times that of manual cleaning. Not to mention the driving floor washer, the efficiency is almost double that of the hand-push floor washer, making it an artifact for cleaning larger areas.

On the other hand, the cost of using a floor washing machine is not high. It only costs 3-5 yuan per day in electricity bills. The wearing parts are replaced 2-3 times a year, and the wearing parts are not expensive.

Floor washing machines provide great convenience for cleaning public places such as hotels and factories. However, many users report that the cleaning power of floor washing machines decreases after being used for a long time. In this regard, we believe that the decline in the cleaning capacity of the floor washing machine is mainly caused by the following two aspects:

1. The brush plate is seriously worn

If the floor washing machine is used for a long time, its brush plate will wear to varying degrees. How to judge the degree of wear of the brush disk? At this time, the brush disk should be removed and viewed. If the length of the bristles is less than 1.5cm, a new brush disk needs to be replaced in time to avoid affecting the cleaning effect.

2. The squeegee is damaged or has residue

1. When the cleaning power of the floor washing machine decreases, you should promptly check whether there are any residues in the squeegee strips, and if so, clean them in time;

2. Check whether the squeegee rubber strip is damaged. If damaged, the sealing performance will be affected, resulting in incomplete water absorption and uncleanness.

3. Check whether the squeegee is parallel to the ground. If not, adjust the angle of the squeegee first. The professional angle is 45 degrees between the squeegee and the ground.

There is also a smaller point. As the working hours of the floor washing machine become longer, in addition to the decrease in cleaning power caused by damaged parts, the cleaning power of the floor washing machine is also related to the power. Generally speaking, the greater the power, the higher the cleaning efficiency of the floor washing machine. However, we cannot blindly pursue the power of the floor washing machine. Instead, we must choose a floor washing machine with appropriate power based on the size of the cleaning area, type of floor and other factors.