The L520B small industrial hand-push floor washer of YOUNISI is a cleaning equipment with three-in-one functions of washing, wiping and drying the floor. It is also an industrial design, which makes the floor washer durable and indestructible, leaving the floor as clean as new and greatly reducing cleaning fatigue and working time. The L520B small industrial hand-push floor washer can quickly remove dirt on the ground and significantly improve the quality of cleaning and hygiene. Especially suitable for use in 500m2-2000m2 places.

What consumables are included in the daily use of a small hand push floor scrubber? In addition to the wear and tear of the machine's own accessories, there are also other consumables. Xiaomian will give you a brief introduction.

1. Floor scrubbing brush. You can use a floor scrubbing brush for most floor cleaning, but the floor scrubbing brush is a gel-bristle brush. Just like the toothbrush we use every day, long-term scrubbing will cause wear and tear. Finally, the bristles of the brush will be worn away, and then we need to replace the floor scrubbing brush.

2. Water-absorbing rubber strip, which is an important part of the squeegee head. The suction effect of the hand-push floor scrubber depends on the ability of the rubber strip to collect sewage. However, it is made of glue and is easily worn, and its service life is only a few months. Rubber strips are also divided into wear-resistant strips and oil-proof strips. If the ground is oily, choose oil-proof strips. If it is ordinary, wear-resistant strips will suffice.

3. Scouring pad. Some floors are not suitable for cleaning with a floor washer brush disk, so a scouring pad should be used instead of a floor scrubbing brush. The service life of a scouring pad is very short, often only half a month to a month. The scouring pad is mainly used with the needle holder. There are three types of scouring pads: black, red, and white. The darker the color, the stronger the hardness. How to use it mainly depends on the degree of dirt on the ground and the softness and hardness of the ground. Generally, red scouring pads are sufficient. Except for high-gloss epoxy resin floors, white scouring pads are required.

4. Floor scrubber. When cleaning dirty floors, you need to add some detergent or stain remover. This is also one of the consumables. When cleaning the floor for the first time, you can add an appropriate amount of detergent for use. If there is oil on the floor, the cleaning agent we need to prepare is a heavy oil cleaning agent. What needs to be reminded here is that when choosing a detergent, use a low-foaming neutral detergent. If it is a high-foaming neutral detergent, you need to add an appropriate amount of defoaming agent or defoaming agent to the sewage tank during cleaning.

5. Use of water and electricity. The small hand push floor washer is also an electric device. The battery of the small hand push floor washer needs to be charged daily. The small hand push floor washer needs water to clean the floor, so water has become a daily consumable for the small hand push floor washer.

As mentioned above, except for the floor brushes and water-absorbent strips of the floor washing machine, which are commonly used, the rest are optional. Mainly choose based on needs. So when everyone is purchasing a floor washing machine, it’s OK to figure out your own floor environment and then choose the appropriate accessories. In addition, you must always pay attention to the loss of consumables and replace floor washing machine accessories in time to ensure the normal operation of the floor washing machine.