How to maintain a walk-behind floor scrubber? What specific maintenance knowledge do you have? Let the editor of YOUNISI finally sort out a detailed content through the integration and collection of various materials, and try to make it as simple and understandable as possible to share with friends:

1. Basic maintenance of hand push floor washing machine

1. Battery: The service life of the battery is about 3 years. Most hand-push floor scrubbers use water-added batteries. For this kind of battery, special water for the battery is usually added once every 3 months. Nowadays, there is basically less liquid added, and they are all maintenance-free batteries, and some customers even need lithium batteries. This is all based on the development of the times, and customer needs are constantly changing.

2. Motor: After about half a year of use, observe the sound and speed of the motor. Generally, the service life of the carbon brushes in the motor is about half a year. If an abnormality is found in the motor during the period of use, remove the carbon brushes. The motors of current floor scrubbers are basically brushless. If the motor is changed, just replace the motor directly.

2. Routine maintenance of hand push floor washing machine

1. Lubricate some parts in time, such as wheels, scraper adjustment screws, and brush plate adjustment screws.

2. After each use of the equipment, check the wheels of the machine to see if they are wrapped with ropes, thin wires, hair, or other fibrous objects, and clean them in time.

3. Wiping and cleaning of hand push floor washer

Every day after we use the cleaning equipment, we use towels to wipe and clean several parts of the machine.

1. Wipe and clean the squeegee. After each use of the equipment, remove the squeegee and rinse it with clean water. It is important to rinse the squeegee, soil and garbage at the bottom.

2. When wiping and cleaning the motor, you need to pay attention to using a dry towel to ensure that water does not easily enter the motor during the cleaning process.

3. Wipe the fuselage.

4. Wipe and clean the sewage tank. When wiping and cleaning the sewage tank, avoid peeling off and loosening of the sealing strip.

4. Replacement of consumables for hand push floor washing machine

1. Brush: The usage cycle of the brush is generally about 4-6 months (mainly based on the frequency of use and the friction of the ground). The bristles generally have about 1 cm remaining, and a new brush needs to be replaced.

2. Squeegee: The service life of the scraper is generally about 4-6 months (mainly based on the frequency of use and the friction of the ground). The standard for replacing the scraper is that the scraper and the iron frame that fixes the scraper are about 1 cm below the iron frame. A new scraper needs to be replaced. On some oily floors, the rubber strips become wavy and need to be replaced before they are worn.

By doing the above, the service life of the hand push floor scrubber will basically be extended. If the machine is used as a tool for arbitrary use without maintenance, money will be spent, and the results we expected will often not be achieved.