Users who have bought a floor scrubber know that the common accessories and consumables of Wuxi hand-push floor scrubbers and Wuxi driving-type floor scrubbers include: brush trays, scouring pads, batteries, chargers, absorbent strips, solenoid valves, etc. There are other commonly used accessories, which will not be explained one by one here.

Wuxi floor washer brush disc: In order to prevent damage to the floor and wear, please avoid using the brush when the machine is stationary. Check the wear degree of the brush every 100 hours while the machine is in use.

Scouring pads: Scouring pads of different sizes are suitable for different models of Wuxi floor scrubbers. Scouring pads can also be used for cleaning, waxing, polishing, and maintenance. Black has the greatest friction and is suitable for dirtier floors. White is softer and is used for general floor cleaning. Red is between black and white.

Wuxi floor scrubber battery: It is forbidden to over-discharge the battery, which will cause permanent damage to the battery. Charge it and make sure the emergency stop switch is pressed. Before the Wuxi floor washing machine is stopped for a long time, please fully charge the Wuxi floor washing machine battery and then store it. During storage, it needs to be charged at least once every month to prevent battery damage.

Wuxi floor washing machine solenoid valve: The water supply solenoid valve is a cleanable solenoid valve. Check and clean the solenoid valve every 100 working hours.

The main function of Wuxi floor scrubber water-absorbing strips is to cooperate with the water-absorbing motor to collect and absorb the sewage and detergent left on the ground after the front brush cleans it. After being used for a period of time, the rubber strips will wear due to friction, which will affect the water absorption effect. Therefore, please check the condition of the rubber strips frequently and replace the water-absorbent rubber strips. After using it for a period of time, consider replacing it.

Steps to replace the absorbent strip:

■ Lower the squeegee using the squeegee lift handle

■ Loosen the two fixing handles and remove the squeegee from the bracket

■ Remove the suction hose from the squeegee

■ Loosen the fixing buckle and take out the fixing bracket

■ Take out the water-absorbent tape

■(Wuxi YOUNISI floor washing machine accessories: Wuxi floor washing machine water-absorbing strips can be used on four sides) The strips can be used repeatedly on four sides. If four sides have been used, replace them with new ones.

■Reinstall the fixing bracket and fasten the fixing buckle

The above introduction is also an issue that needs to be paid attention to and considered in the daily operation of Wuxi floor washing machine. Therefore, as long as a lot of major repairs and maintenance are needed in daily cleaning, a lot of unnecessary troubles will be reduced. When purchasing Wuxi floor washing machine accessories, you still need to look for professional manufacturers. The introduction is detailed and professional. Wuxi YOUNISI is your good choice!