Workshop floor cleaning operation method

Wuxi YOUNISI' factory cleaning business mainly includes factory exterior wall cleaning, workshop cleaning, and renovation workshop floor cleaning. The company disinfects and cleans various soft floors (plastic floors, soft rubber floors), hard floors (marble, granite, ceramic tiles, cement, mosaics, wooden floors), etc., to remove all stains on the ground, and then performs professional treatments such as vinegar and polishing to quickly restore the dirty floor to smoothness.

Tools and materials used for workshop floor cleaning:

Tools: floor scrubber, nylon brush tray, water suction machine, mop, bucket.

Materials used: weak alkali or neutral detergent.

Workshop floor cleaning operation methods:

1. Pour the diluted cleaning solution into the floor washing machine, turn it on, and move forward from back to front, walking in a straight line to avoid omissions.

2. Start the water suction machine while scrubbing, and absorb the sewage while scrubbing. For areas that cannot be washed by the floor washer, you can use a mop soaked in detergent to wring out and scrub.

3. After cleaning with detergent and sucking up the sewage on the floor, wash it again with clean water in the same way and suck up the water.

4. Note: It is forbidden to use acidic detergents and powdery detergents to clean the floor, otherwise they will damage and corrode the stone surface. Avoid rubbing the floor with rough objects to avoid leaving permanent scratches on the stone surface.

5. Standard: clean and translucent, no stains, no marks